迄今发表论文150余篇⬜️，SCI收录90余篇，获得授权专利50余项。
代表性学术论文🏡：
1 Chen GY, Jin B, Li YL, Zhang ZH, He YY*, Luo JB. Controllable group tailoring enables enhanced pH-responsive behaviors of polydopamine delivery system in smart self-healing anticorrosion coatings, Progress in Organic Coatings, 2022, 170:106989.
2 Jin B, Zhao J, He YY*, Chen GY, Li YL, Zhang CH, Luo JB. High-quality ultra-flat reduced graphene oxide nanosheets with super-robust lubrication performances, Chemical Engineering Journal, 2022, 438:135620.
3 Li YL, Sun DN, He YY*, Luo JB. Coupled Optimization of Groove Texture for Parallel Ring–Ring Friction Pairs: Theory and Experiments, Tribology Letters, 2022, 70:53.
4 Jin B, Chen GY, Zhao J, He YY*, Li YL, Luo JB. Coupling effect of boundary tribofilm and hydrodynamic film, Cell Reports Physical Science, 2022, 3:100778.
5 Chen GY, Jin B, Li YL, He YY*, Luo JB. A smart healable anticorrosion coating with enhanced loading of benzotriazole enabled by ultra-highly exfoliated graphene and mussel-inspired chemistry, Carbon, 2022, 187:439-450.
6 Zhao J, Gao T, Li YR, He YY*, Shi YJ*. Two-dimensional (2D) graphene nanosheets as advanced lubricant additives: A critical review and prospect, Materials Today Communications, 2021, 29:102755.
7 Chen GY, Jin B, Zhao J, Li YL, He YY*, Luo JN. Efficient one-pot synthesis of mussel-inspired Cu-doped polydopamine nanoparticles with enhanced lubrication under heavy loads, Chemical Engineering Journal, 2021, 426:131287
8 Jin B , Zhao J*, Chen GY, He YY*, Huang YY, Luo JB. In situ synthesis of Mn3O4/graphene nanocomposite and its application as a lubrication additive at high temperatures, Applied Surface Science, 2021, 546:149019.
9 Zhao J, Huang YY, He YY*, Shi YJ. Nanolubricant additives: A review, Friction, 2021, 9(5): 891–917.
10 Zhao J, Li QZ, Li SX*, Li SC, Chen GY, Liu XH, He YY*, Luo JB. Influence of a carbon-based tribofilm induced by the friction temperature on the tribological properties of impregnated graphite sliding against a cemented carbide, Friction, 2020, 9(4):686–696.
11 Zhang ZH, Bi YJ, Zhang MY, Li Y, Zhao FS, Zhang SZ, He YY*. Properties of stainless-steel surface after hollow cathode assisted plasma nitriding, Materials Research Express, 2020, 7: 116524.
12 Zhao J, Huang YY, Li YR, Gao T, Dou Z, Mao JY, Wang HD, He YY*. Li SX, Luo JB, Superhigh-exfoliation graphene with a unique two-dimensional (2D) microstructure for lubrication application, Applied Surface Science, 2020, 513:145608.
13 Li Y*, Bi YJ, Zhang MY, Zhang SZ, Gao XP, Zhang ZH, He YY*. Hollow cathodic plasma source nitriding of AISI 4140 steel, Surface Engineering, 2020, 37(3):351-359.
14 Zhang MY, Chen JH, Li Y*, Chen GY, He YY*, Luo JB. Study on microstructural and tribological properties of sulphonitrocarburized layers diffused by hollow cathode discharging, Vacuum 174: 109188.
15 Chen GY, Zhao J*, Chen K, Liu SY, Zhang MY, He YY*, Luo JB. Ultrastable Lubricating Properties of Robust Self-Repairing Tribofilms Enaled by in Situ-Assembled Polydopamine Nanoparticles, Langmuir, 2020, 36:852−861.
16 Wang E, He YY*, Zhao J, Mao JY, Hu YT, Luo JB. Optimization of groove texture profile to improve hydrodynamic lubrication performance: Theory and experiments, Friction, 2020, 8: 83-94.
17 Mao JY, Chen GY, Zhao J, He YY*, Luo JB. An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive, Friction, 2020, 9(2): 228-238.
18 Zhao J, Mao JY, Li YR*, He YY*, Luo JB. In Situ Green Synthesis of the New Sandwichlike Nanostructure of Mn3O4/Graphene as Lubricant Additives. ACS Applied Material & Interfaces, 2019, 40👶：36931-36938.
19 Li Y, Liu ZL, Luo JB, Zhang SZ*, Qiu JX, He YY*. Microstructure, mechanical and adhesive properties of CrN/CrTiAlSiN/WCrTiAlN multilayer coatings deposited on nitrided AISI 4140 steel, Materials Characterization, 2019, 147:353-364.
20 Zhao J, Mao JY, Li YR, He YY*, Luo JB*. Friction-induced Nano-structural Evolution of Graphene as a Lubrication Additive. Applied Surface Science, 2018, 434: 21-27.
21 Li Y, He YY, Wang W, WJY, Zhang L, Zhu YJ, Ye QW, Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior, Journal of Materials Engineering and Performance, 2018, 27(3): 948-960.
22 Mao JY, Zhao J, Wang W, He YY*, Luo J B. Influence of the Micromorphology of Reduced Graphene Oxide Sheets on Lubrication Properties as a Lubrication Additive. Tribology International, 2018, 119: 614-621.
23 Wang W, He YY*, Li Y, Wei B, Hu YT, Luo JB. Investigation on Inner Flow Field Characteristics of Groove Textures in Fully Lubricated Thrust Bearings. Industrial Lubrication and Tribology, 2018, 70(4): 754-763.
24 Li Y, He YY*, Zhang SZ, Wang W, Zhu, YJ, Microstructure and Corrosion Resistance of Nitrogen-rich Surface Layers on AISI 304 Stainless Steel by Rapid Nitriding in a Hollow Cathode Discharge, Applied Physics A-Materials Science & Processing, 2018, 12(1):65.
25 Li Y, He YY*, Zhang SZ, He XC, Wang W, Hu BG, Microstructures and Tribological Behaviour of Oxynitrided Austenitic Stainless Steel, Vacuum, 2017: 146:1-7.
26 Zhao J, Li YR*, Mao J, He YY*, Luo J B. Synthesis of Thermally Reduced Graphite Oxide in Sulfuric Acid and Its Application as an Efficient Lubrication Additive. Tribology International, 2017, 116: 303-309.
27 Li Y, He YY*, Xiu, JJ, Wang W, Zhu, YJ, Hu BG, Wear and corrosion properties of AISI 420 martensitic stainless steel treated by active screen plasma nitriding, Surface & Coatings Technology, 2017, 329: 184-192.
28 Wang W, He YY*, Zhao J, Li Y, Luo JB. Numerical Optimization of the Groove Texture Bottom Profile for Thrust Bearings, Tribology International, 2017, 109: 69-77.
29 Zhao J, Li YR, Wang YF, Mao JY, He YY*, Luo JB*. Mild thermal reduction of graphene oxide as a lubrication additive for friction and wear reduction, RSC Advances, 2017, 7(3): 1766-1770.
30 Zhao DW, He YY, Wang TQ, Lu XC*. Comparative Study of the Lubricating Behavior Between 12-in. Copper Disk and Wafer During Chemical Mechanical Polishing, Tribology International, 2017, 105: 37-41.
31 Li YR, Zhao J, Tang C, He YY, Wang YF, Chen J, Mao JY, Zhou QQ , Wang BY, Wei F, Luo JB*. Highly Exfoliated Reduced Graphite Oxide Powders as Efficient Lubricant Oil Additives, Advanced Materials Interfaces, 2016, 3(22): 1600700.
32 Zhao J, He YY, Wang YF, Wang W, Yan L, Luo JB*. An investigation on the tribological properties of multilayer graphene and MoS2 nanosheets as additives used in hydraulic applications, Tribology International, 2015, 97: 14-20.
33 Jiang L, He YY, Li J, Luo JB*. Passivation Kinetics of 1,2,4-Triazole in Copper Chemical Mechanical Polishing, ECS Journal of Solid State Science and Technology, 2016, 5(5): 272-279.
34 Jiang L, He YY, Liang H, Li YZ, Luo JB*. Effect of Potassium Ions on Tantalum Chemical Mechanical Polishing in H2O2-Based Alkaline Slurries, ECS Journal of Solid State Science and Technology, 2016, 5(2): 100-111.
35 Jiang L, Yao WF, He YY, Cheng ZD, Yuan JL, Luo JB*. An Experimental Investigation of Double-side Processing of Cylindrical Rollers Using Chemical Mechanical Polishing Technique, International Journal of Advanced Manufacturing Technology, 2016, 82(1-4): 523-534.
36 Jiang L, He YY, Luo JB*. Chemical mechanical polishing of steel substrate using colloidal silica-based slurries, Applied Surface Science, 2015, 330: 487-495.
37 Jiang L, He YY, Yang Y, Luo JB*. Chemical mechanical polishing of stainless steel as solar cell substrate, ECS Journal of Solid State Science and Technology, 2015, 4(5): 162-170.
38 Jiang L, He YY, Luo JB*. Effects of pH and Oxidizer on Chemical Mechanical Polishing of AISI 1045 Steel, Tribology Letters, 2014, 56(2): 327-335.
39 Jiang L, He YY, Li YZ, Luo JB*. Effect of ionic strength on ruthenium CMP in H2O2-based slurries, Applied Surface Science, 2014, 317: 332-337.
40 Jiang L, He YY*, Li Y, Li YZ, Luo JB. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry, Microelectronic Engineering, 2014, 122: 82-86.
41 Jiang L, He YY, Niu XY, Li YZ, Luo JB*. Synergetic effect of benzotriazole and non-ionic surfactant on copper chemical mechanical polishing in KIO4-based slurries, Thin Solid Films, 2014, 558: 272-278.
42 Jiang L, Lan YQ, He YY, Li Y, Li YZ, Luo JB*. 1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing, Thin Solid Films, 2014, 556: 395-404.
43 Jiang L, Lan YQ, He YY, Li YZ, Luo JB*. Functions of Trilon® P as a polyamine in copper chemical mechanical polishing, Applied Surface Science, 2014, 288: 265-274.
44 He YY*, Zhao ZK，Luo TY, Lu XC, Luo JB. Failure Analysis of Journal Bearing Used in Turboset of A Power Plant, Materials & Design, 2013, 52: 923-931.
45 Zhao DW, He YY, Wang TQ, Lu XC, Luo JB. Wafer Bending/orientation Characterization and Their Effects on Fluid Lubrication During Chemical Mechanical Polishing, Tribology International, 2013, 66: 330-336.
46 Zhao DW, Wang TQ, He YY, Lu XC*. Effect of Zone Pressure on Wafer Bending and Fluid Lubrication Behavior During Multi-zone CMP Process, Microelectronic Engineering, 2013, 108: 33-38.
47 Zhao ZK, He YY, Yang HF, Qu XP, Lu XC, Luo JB*. Aminosilanization Nanoadhesive Layer for Nanoelectric Circuits with Porous Ultralow Dielectric Film, ACS Applied Materials & Interfaces, 2013, 5(13): 6097-610.
48 He YY*, Zhang XM. Approximate Entropy Analysis of the Acoustic Emission from Defects in Rolling Element Bearings, ASME Transaction- Journal of Vibration and Acoustics, 2012, 134( 6): 061012.
49 Zhao DW, He YY, Wang TQ, Lu XC*. Effect of Kinematic Parameters and Their Coupling Relationships on Global Uniformity of Chemical-Mechanical Polishing, IEEE Transactions On Semiconductor Manufacturing, 2012, 25(3): 502-510.
50 Zhao DW, He YY, Wang TQ, Lu XC*, Luo JB. Effects of the Polishing Variables on the Wafer-Pad Interfacial Fluid Pressure in Chemical Mechanical Polishing of 12-Inch Wafer, Journal of the Electrochemical Society, 2012, 159(3): H342-H348.
代表性授权专利
1. 离子氮碳硫多元共渗辅助设备👨🏻🍳、处理系统及方法（第一发明人）👲🏿，ZL202210066178.0
2. 离子氮碳硫多元共渗设备、处理系统及方法（第一发明人），ZL20211443771.4
3. 一种高硬度38CrMoAl氮化钢的化学热处理方法（第一发明人）， ZL202111170513.3
4. 一种复合润滑材料的制备方法（第一发明人），ZL202110860921.5
5. 一种超规整石墨烯基润滑脂的制备方法（第一发明人），ZL202110423727.0
6. 一种铜掺杂聚多巴胺纳米颗粒的制备方法及其应用（第一发明人），ZL202011366016.6
7. 聚多巴胺纳米颗粒在水基润滑液中的应用（第一发明人），ZL202010303829.4
8. 一种钛合金表面离子碳氮共渗处理装置（第一发明人），ZL202011619364.X
9. Ti/TiN/TiAlSiN/TiAlCrSiN纳米多层梯度膜及其制备方法（第一发明人），ZL201811136994.4
10. 石墨烯/四氧化三锰复合纳米润滑添加剂及其合成方法（第一发明人），ZL201710958604.0
11. 提高轴承耐磨性能的方法及轴承（第一发明人）🐩，ZL201710352182.2
12. 制备膨化石墨烯润滑剂添加剂的方法🫴🏿、膨化石墨烯剂滑油添加剂和润滑剂（第一发明人），ZL201610942793.8
13. 增强液压系统摩擦副耐磨特性的方法及液压系统摩擦副👱♂️🕗、液压系统（第一发明人）🧑🏿🎓，201710348319.7
14. 航空轴向柱塞液压泵（第一发明人），ZL201510084816.1
15. 用于加工超光滑轴承钢表面的抛光液及其应用（第三发明人）🙇，ZL201410490804.4
16. 用于钴阻挡层结构化学机械抛光的抛光液及其应用（第三发明人），ZL201510213354.9
17. 轴承圆柱滚子圆柱面的超精加工方法（第五发明人），ZL201510041312.1
18. 化学机械抛光机及具有它的化学机械抛光设备（第三发明人），ZL201010246628.1
19. 抛光头（第三发明人），ZL201110039127.0
20. 一种抛光垫修整头（第三发明人），ZL201010217013.6
21. 一种用于化学机械抛光设备的晶圆交换装置（第四发明人），ZL201010623316.8
22. 一种新型化学机械抛光装置（第三发明人），ZL201010266634.3
23. 一种硅片边缘膜厚测量方法（第三发明人），ZL201010266786.3
24. 抛光液物理参数测量装置、测量方法和化学机械抛光设备（第三发明人）🐪，ZL201110058436.2
25. 化学机械抛光设备（第二发明人），ZL201310180314.X
