2023.12 – 凯发平台, 长聘教授，

2003.12 – 2023.11 凯发平台, 副教授(博导2010；长聘2017)

2005.01-2006.01 荷兰Delft University of Technology (TU Delft), 博士后

2001.08-2003.11 凯发平台，讲师

1999.09-2001.08 凯发平台，博士后（合作导师，曾攀教授）

本科生课程“机械工程数值计算”（24/48学时）（2023-）

本科生课程“有限元分析”(32学时）（2016-）

本科生课程“材料加工工艺”(24/48学时）（2002-2015）

研究生课程“工程应用的有限元分析专题”🪹，精品课 (32学时)（2003-）

研究生课程“有限元分析及应用”🥃，精品课 (16/48学时)（2020-）

研究生课程“塑性加工模拟技术”🛍，(32/48学时)（2007-2018）

研究领域为金属塑性成形，延性损伤和断裂，形状记忆合金弹热制冷和增材制造等🎅🏻。主持完成和在研项目30余项🧑🏿‍🦱，其中国家自然科学基金项目6项，北京市自然科学基金1项，教育部留学回国基金1项，与国际企业合作7项，与国内企业合作项目20余项。2001年至今发表学术论文100余篇，其中被SCI检索80余篇，合著教材和专著各1本。

近期（2019—）主要科研项目

1. Workability Evaluation of Maraging Stainless Steel and Control of Microstructure Evolution🏊🏽‍♂️，国外企业合作，2020.09-2021.03

2. 镁合金塑性变形及延性损伤断裂的多尺度建模及应用，国家自然科学基金面上项目，2021.1-2024.12

3. 热轧钢板摆剪和高速飞剪剪切过程模拟分析，国内企业合作#️⃣，2022.02-2023.06

4. 动车组轮装制动盘塑性矫形仿真计算及损伤评估，国内企业合作⌛️💆‍♀️，2021.05-2023.03

5. 基于CA和相场方法的钢轨再结晶与相变过程介观组织模拟☂️，国内企业合作，2023.04-2024.06

6. NiTi形状记忆合金的微观组织调控及弹热性能提升，自主科研课题。

出版著作

1. 曾攀, 雷丽萍, 方刚, 基于ANSYS平台有限元分析手册—结构的建模与分析, 机械工业出版社, 2011

2. 黄天佑, 都东, 方刚，材料加工工艺(教材,第二版), 北京K8凯发平台娱乐开户官方网站出版社, 2010

近期（2019-2023）发表的论文

发表在学术期刊上👨‍👧‍👧：(更新🪬🦵、更全面的发表记录可在谷歌学术上用Gang Fang Tsinghua搜索到)

1. Zhang Q, Chen J, Fang G. From mechanical behavior and elastocaloric effect to microscopic mechanisms of gradient-structured NiTi alloy: A phase-field study. International Journal of Plasticity, 2023, 171, 103809.

2. Huang W, Lei L, Fang G. Optimizing Heat Treatment to Improve the Microstructures and Mechanical Properties of 5CrNiMoV Steel. Metals, 2023, 13(7), 1263.

3. Li F, Zhu J, Zhang W, Fang G. Investigation on the inhomogeneous deformation of magnesium alloy during bending using an advanced plasticity model. Journal of Materials Research and Technology, 2023, 25, 5064-5075.

4. Chen J, Lei L, Fang G, Wang D. Achieving great comprehensive elastocaloric cooling performances of superelastic NiTi by grain size engineering. Materials Today Nano, 2023, 21, 100279.

5. Zhang X, Jiang L, Yan X, Wang Z, Li X, Fang G. Regulated Multi-Scale Mechanical Performance of Functionally Graded Lattice Materials based on Multiple Bioinspired Patterns. Materials & Design, 2023, 226, 111564.

6. Zhang Q. Fang G. An efficient grain remapping algorithm for phase-field modeling of dynamic recrystallization. Computational Materials Science, 2022, 215, 111778.

7. Bai S, Fang G, Jiang B. An extrusion-welding criterion of magnesium alloy considering interfacial void shrinkage driven by plastic deformation and atomic diffusion. Materials & Design, 2022, 222, 111107.

8. Chen J, Lei L, Fang G. Grain-size effects on the temperature-dependent elastocaloric cooling performance of polycrystalline NiTi alloy. Journal of Alloys and Compounds, 2022, 927, 166951.

9. Liu B, Fang G, Lei L, Yan X. Predicting the porosity defects in selective laser melting (SLM) by molten pool geometry, International Journal of Mechanical Sciences, 2022, 228, 107478.

10. Li F, Fang G. Stress-state dependency of ductile fracture in an extruded magnesium alloy and its underlying mechanisms. International Journal of Plasticity, 2022, 152, 103258.

11. Liu B, Fang G, Lei L, Liu W. Experimental and numerical exploration of defocusing in Laser Powder Bed Fusion (LPBF) as an effective processing parameter. Optics & Laser Technology, 2022. 149, 107846.

12. He Y, Fang G. Characterization of dynamic precipitation behaviors accompanying dynamic recrystallization in an Mg-Al-Zn-RE alloy. Journal of Alloys and Compounds, 2022, 901, 163745.

13. He Y, Bai S, Fang G. Coupled CA-FE simulation for dynamic recrystallization of magnesium alloy during hot extrusion. Journal of Magnesium and Alloys, 2022, 10 (3), 769-785.

14. Chen J, Liu B, Xing L, Liu W, Lei L, Fang G. Toward tunable mechanical behavior and enhanced elastocaloric effect in NiTi alloy by gradient structure, Acta Materialia, 2022, 226, 117609.

15. Huang W, Zhong H, Lei L, Fang G. Microstructure and mechanical properties of multi-pass forged and annealed 42CrMo steel. Materials Science and Engineering: A, 2022, 831, 142191.

16. Chen J, Lei L, Fang G. Elastocaloric cooling of shape memory alloys: A review. Materials Today Communications, 2021, 28, 102706.

17. Huang W, Lei L, Fang G. Comparison Between Four Flow Stress Models Characterizing the Constitutive Behavior of Hot Deformation of 40Mn Steel. Journal of Materials Engineering and Performance, 2021, 30 (12), 9149-9164.

18. Zhao P, Jiao J, Tang Y, Fang G. Investigation on damage evolution and acoustic emission behavior of aluminum alloy sheet during blanking process. The International Journal of Advanced Manufacturing Technology, 2021, 117 (1), 675-688.

19. Bai S, Fang G, Jiang B, Zhou J. Investigation into Atomic Diffusion at the Interface During Extrusion Welding of Magnesium and Magnesium Alloys. Metallurgical and Materials Transactions A 52, 4222-4233.

20. 方刚, 陈祝, 雷丽萍. 非关联本构模型在铝合金板料成形有限元模拟中的应用. 塑性工程学报, 2021, 28 (6), 8-18.

21. Qian L, Ji W, Sun C, Fang G, Lian J. Prediction of edge fracture during hole-flanging of advanced high-strength steel considering blanking pre-damage. Engineering Fracture Mechanics, 2021, 248, 107721.

22. Li X, Fang G, Zhao J, Zhang Z, Sun L, Wang H, Wu X. Random Error in Strain Calculation using Regularized Polynomial Smoothing (RPS) and Point-wise Least Squares (PLS) in Digital Image Correlation. Optics and Lasers in Engineering, 2021, 142, 106590.

23. Liu B, Fang G, Lei L. An analytical model for rapid predicting molten pool geometry of selective laser melting (SLM). Applied Mathematical Modelling, 2021, 92, 505-524.

24. Chen J, Xing L, Fang G, Lei L, Liu W. Improved elastocaloric cooling performance in gradient-structured NiTi alloy processed by localized laser surface annealing. Acta Materialia, 2021, 208 (4), 116741.

25. 杨昆瑛, 方刚, 曾攀, 雷丽萍, 张从发. 双辊柔性滚弯成形过程三维有限元分析. 塑性工程学报, 2020, 27 (8), 32-38.

26. Li F, Fang G, Qian L. Forming limit analysis of Mg-2Zn-1.2Al-0.2Ca-0.2RE alloy sheet using ductile fracture models, International Journal of Damage Mechanics, 2020, 29 (8), 1181–1198.

27. Li F, Fang G, Modeling of 3D plastic anisotropy and asymmetry of extruded magnesium alloy and its applications in three-point bending, International Journal of Plasticity, 2020, 130, 102704

28. Bai S, Fang G. Experimental and numerical investigation into rectangular tube extrusion of high-strength magnesium alloy. International Journal of Lightweight Materials and Manufacture, 2020, 3(2), 136-143.

29. Huang W, Lei L, Fang G, Microstructure evolution of hot work tool steel 5CrNiMoV throughout heating, deformation and quenching, Materials Characterization, 2020, 163: 110307.

30. Zhao P, Sun Y, Jiao J, Fang G, Correlation between acoustic emission detection and microstructural characterization for damage evolution, Engineering Fracture Mechanics, 2020, 230: 106967.

31. Zhang S, Chen G, Qu T, Fang G, Bai S, et al, Simultaneously enhancing mechanical properties and electrical conductivity of aluminum by using graphene as the reinforcement. Materials Letters, 2020, 265, 127440.

32. Liu B, Fang G, Lei L, Liu W. A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM), Applied Mathematical Modelling, 2020, 79, 506-520.

33. Zhang X, Yan X, Fang G, Liu W. Biomechanical influence of structural variation strategies on functionally graded scaffolds constructed with triply periodic minimal surface, Additive Manufacturing, 2020, 32: 101015

34. 李非凡, 雷丽萍, 方刚, 镁合金塑性变形及延性断裂预测研究进展(下)—延性断裂模型的开发及应用，塑性工程学报, 2020, 27 (2), 1-12.

35. 李非凡, 雷丽萍, 方刚, 镁合金塑性变形及延性断裂预测研究进展(上)—宏观本构模型的开发及应用, 塑性工程学报, 2020, 27 (1), 1-13

36. Bai S, Fang G, Zhou J. Construction of three-dimensional extrusion limit diagram for magnesium alloy using artificial neural network and its validation, Journal of Materials Processing Technology, 2020, 275: 116361.

37. Li X, Fang G, Zhao J, Zhang Z, Sun L, Wang H, Wu X. A practical and effective regularized polynomial smoothing (RPS) method for high-gradient strain field measurement in digital image correlation. Optic and Lasers in Engineering, 2019, 121: 215-226.

38. Bai S, Fang G, Zhou J. Investigation into the Extrudability of a New Mg-Al-Zn-RE Alloy with Large Amounts of Alloying Elements. Metallurgical and Materials Transactions A, 2019, 50A (7): 3246-3264.

39. Chen Z, Zhao J, Fang G. Finite element modeling for deep-drawing of aluminum alloy sheet 6014-T4 using anisotropic yield and non-AFR models. International Journal of Advanced Manufacturing Technology, 2019, 104(1-4): 535-549.

40. Bai S, Fang G, Zhou J, Integrated Physical and Numerical Simulations of Weld Seam Formation during Extrusion of Magnesium Alloy, Journal of Materials Processing Technology, 2019, 266: 82-95.

41. Xi B, Fang G, Xu S, In-situ analysis of microscopic plastic and failure behaviors of extruded magnesium alloy, Materials Science and Engineering: A, 2019, 749: 148-157.

42. Zhang X, Fang G, Leeflang A, Zadpoor A. A, Zhou J. Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials, Acta Biomaterialia, 2019, 84: 437-452.

43. Li X, Fang G, Zhao J, Zhang Z, Wu X, Local Hermite (LH) Method: An accurate and robust smooth technique for high-gradient strain reconstruction in digital image correlation, Optics and Lasers in Engineering, 2019, 112: 26-38.

发表在国际会议论文集上：

44. Zhang Q, Fang G. Accelerated Phase-Field Simulations for Static and Dynamic Recrystallization, The 14th International Conference on the Technology of Plasticity (ICTP2023). 597-604.

45. Zhao P, Jiao J, Fang G, Chen Z, Gao X. Investigation on tensile deformation and failure for 5052 aluminum alloy based on continuum damage model. Journal of Physics: Conference Series 2085 (1), 012039.

46. Zhao P, Bai S, Fang G, Experimental study on rotary draw bending of magnesium alloy extruded tubes, IOP Conference Series: Materials Science and Engineering, Volume 770, 012113. 8th Global Conference on Materials Science and Engineering (CMSE2019) 12-15 November 2019, Sanya, China